basato su 3477 recensioni

QSC 4x cassa AD-S8T + 2x amplificatore GXD8 + AD-S112SW

5 / 5
QSC 4x cassa AD-S8T + 2x amplificatore GXD8 + AD-S112SW

Fuori assortimento

Questo prodotto non può essere ordinato

Specifiche

QSC AD-S8T diffusore da installazione
4x QSC AD-S8T diffusore da installazione
The QSC AD-S8T installation speaker is suitable for 70 and 100-volt systems as well as standard audio installations. It has an IP-54 rating, which means it's splash-resistant!

Caratteristiche

Diametro del woofer
8'' (200 mm)
Diametro tweeter
1" (25,4 mm)
Suitable for outdoors
Yes
Sensibilità
90 dB
Peso per cassa
11 kg
Diffusore da installazione / 100 volt
Sì
Colore
Nero
SPL massimo
110 - 119 dB
Frequenza massima
20 - 20,9 kHz
Frequenza minima
50 - 59 Hz
Impedenza nominale
8 ohm
Potenza di picco in watt
350 - 499 watt
Potenza RMS
200 - 349 watt
Set
No

Peso e dimensioni imballaggio incluso

Peso
14,5 kg
Dimensioni
73,0 x 36,0 x 36,0 cm

Specifiche

  • installation speaker
  • capacity: 200 RMS, 400W program
  • woofer: 8 in (2-inch voice coil)
  • tweeter: 1-inch compression driver
  • dispersion angle: 105°
  • frequency range: 55 Hz - 20 kHz
  • max. SPL: 119 dB
  • impedance: 8 ohms
  • taps:
    • 100 Volt: 60, 30, 15, 7.5 W
    • 70 Volt: 60, 30, 15, 7.5 W
  • connector: Euroblock
  • housing: ABS plastic
  • IP rating: 54
  • dimensions: 440 x 254 x 251 mm
  • weight: 14.5 kg
  • includes: X-mount bracket, Euroblock connector, input cover
QSC GXD 8 amplificatore con processore integrato 4500 W
2x QSC GXD 8 amplificatore con processore integrato 4500 W
The GSC GXD 8 amplifier with built-in security circuitry is made for big sound systems and can deliver up to 4500 Watts.

Caratteristiche

Formato rack 19''
Sì, 2 U
Compatibile con 2 ohm
No
Number of amplifier channels
2
Uscita per deviazione audio
No
Modalità bridge
No
Sustainable product
Not specified
Connettore in ingresso
Jack (6,35 mm) + XLR
Filtro integrato
HPF, LPF
Protezioni integrate
Da sovraccarico, termica, da cortocircuito, onde quadre / voltaggio DC, peak limiter, indicatore di clip
Processore DSP integrato
Sì
Raffreddamento
A ventola
RMS power (4 ohms) per channel
1200 - 1299 watts
RMS power (at 8 Ohms) per channel
800 - 899 Watts
Classe dell'amplificatore
D
Uscita amplificatore
Connettore speaker con blocco, morsetti per cavi
Dotato di crossover
No

Peso e dimensioni imballaggio incluso

Peso
7,8 kg
Dimensioni
60,0 x 37,0 x 15,0 cm

Specifiche

  • amplifier with DSP processor
  • power:
  • 8 ohms, dynamic: 2x 1500 Watts
  • 4 ohms, dynamic: 2x 2250 Watts
  • 8 ohms, continuous: 2x 800 Watts
  • 4 ohms, continuous: 2x 1200 Watts
  • distortion: <1% THD, 1 kHz at full capacity
  • signal-to-noise ratio: 100 dB
  • input sensitivity: 1.2 Vrms
  • voltage gain (8 Ohms): 33.5 dB
  • amp type: D class
  • frequency response: 20 Hz - 20 kHz, +0.7 / -0.8 dB
  • dynamic headroom: 2.73 dB
  • damping factor >100
  • input impedance: 20 kOhms balanced, 10k unbalanced
  • maximum input signal: +23.5 dBu
  • input connectors: XLR and jack on each channel
  • output connectors: 2x NL4 (Neutrik SpeakOn)
  • security: short circuit, open circuit, thermal, RF protection
  • DSP functions: hi-pass filter, lo-pass filter, 4-band EQ, limiter, delay
  • dimensions: 89 x 483 x 259 mm
  • weight: 6.0 kg
QSC AD-S112SW subwoofer passivo
1x QSC AD-S112SW subwoofer passivo
The QSC AD-S112Sw passive installation subwoofer is suitable for restaurants, shops, and a variety of audio-visual applications. It's perfect in combination with the QSC AcousticDesign range.

Caratteristiche

Ingresso jack 6,35 mm TRS
No
Diametro del woofer
12'' (305 mm)
Uscite con morsetti per cavi
Sì
Sensibilità
90 dB
Peso per cassa
13 kg
SPL massimo
110 - 119 dB
Frequenza massima del subwoofer
140 Hz
Frequenza minima
35 - 39 Hz
Impedenza nominale
8 ohm
Potenza di picco in watt
200 - 349 watt
Potenza RMS
350 - 499 watt
Ingresso speaker con blocco
Sì

Peso e dimensioni imballaggio incluso

Peso
15,0 kg

Specifiche

  • passive installation subwoofer
  • perfect with AD series speakers
  • rugged, lightweight ABS housing
  • aluminium powder-coated grille
  • turbulent flow reduction port
  • mounting bracket and M10 rigging points
  • IEC60529 IP-54 rating: splash and dust resistant
  • frequency range: 30 – 135 Hz
  • capacity: 300W, 50V (RMS)
  • sensitivity: 90 dB SPL
  • dispersion angle: 75°
  • max. continuous SPL: 115 dB
  • max. peak SPL: 121 dB
  • impedance: 8 ohms
  • tweeter: 1.4 voice coil compression driver
  • woofer: 12-inch cone
  • input connector: Euroblock with parallel output
  • housing material: ABS polymer
  • grille material: aluminium, powder coated
  • colour: black
  • suitable for indoor and outdoor use
  • weight: 13.2 kg
  • dimensions: 594 x 354 x 323 mm
  • includes:
    • suspension bracket
    • Euroblock connector
    • panel cover

Nessuna alternativa trovata

Specifiche

QSC AD-S8T diffusore da installazione
4x QSC AD-S8T diffusore da installazione
The QSC AD-S8T installation speaker is suitable for 70 and 100-volt systems as well as standard audio installations. It has an IP-54 rating, which means it's splash-resistant!

Caratteristiche

Diametro del woofer
8'' (200 mm)
Diametro tweeter
1" (25,4 mm)
Suitable for outdoors
Yes
Sensibilità
90 dB
Peso per cassa
11 kg
Diffusore da installazione / 100 volt
Sì
Colore
Nero
SPL massimo
110 - 119 dB
Frequenza massima
20 - 20,9 kHz
Frequenza minima
50 - 59 Hz
Impedenza nominale
8 ohm
Potenza di picco in watt
350 - 499 watt
Potenza RMS
200 - 349 watt
Set
No

Peso e dimensioni imballaggio incluso

Peso
14,5 kg
Dimensioni
73,0 x 36,0 x 36,0 cm

Specifiche

  • installation speaker
  • capacity: 200 RMS, 400W program
  • woofer: 8 in (2-inch voice coil)
  • tweeter: 1-inch compression driver
  • dispersion angle: 105°
  • frequency range: 55 Hz - 20 kHz
  • max. SPL: 119 dB
  • impedance: 8 ohms
  • taps:
    • 100 Volt: 60, 30, 15, 7.5 W
    • 70 Volt: 60, 30, 15, 7.5 W
  • connector: Euroblock
  • housing: ABS plastic
  • IP rating: 54
  • dimensions: 440 x 254 x 251 mm
  • weight: 14.5 kg
  • includes: X-mount bracket, Euroblock connector, input cover
QSC GXD 8 amplificatore con processore integrato 4500 W
2x QSC GXD 8 amplificatore con processore integrato 4500 W
The GSC GXD 8 amplifier with built-in security circuitry is made for big sound systems and can deliver up to 4500 Watts.

Caratteristiche

Formato rack 19''
Sì, 2 U
Compatibile con 2 ohm
No
Number of amplifier channels
2
Uscita per deviazione audio
No
Modalità bridge
No
Sustainable product
Not specified
Connettore in ingresso
Jack (6,35 mm) + XLR
Filtro integrato
HPF, LPF
Protezioni integrate
Da sovraccarico, termica, da cortocircuito, onde quadre / voltaggio DC, peak limiter, indicatore di clip
Processore DSP integrato
Sì
Raffreddamento
A ventola
RMS power (4 ohms) per channel
1200 - 1299 watts
RMS power (at 8 Ohms) per channel
800 - 899 Watts
Classe dell'amplificatore
D
Uscita amplificatore
Connettore speaker con blocco, morsetti per cavi
Dotato di crossover
No

Peso e dimensioni imballaggio incluso

Peso
7,8 kg
Dimensioni
60,0 x 37,0 x 15,0 cm

Specifiche

  • amplifier with DSP processor
  • power:
  • 8 ohms, dynamic: 2x 1500 Watts
  • 4 ohms, dynamic: 2x 2250 Watts
  • 8 ohms, continuous: 2x 800 Watts
  • 4 ohms, continuous: 2x 1200 Watts
  • distortion: <1% THD, 1 kHz at full capacity
  • signal-to-noise ratio: 100 dB
  • input sensitivity: 1.2 Vrms
  • voltage gain (8 Ohms): 33.5 dB
  • amp type: D class
  • frequency response: 20 Hz - 20 kHz, +0.7 / -0.8 dB
  • dynamic headroom: 2.73 dB
  • damping factor >100
  • input impedance: 20 kOhms balanced, 10k unbalanced
  • maximum input signal: +23.5 dBu
  • input connectors: XLR and jack on each channel
  • output connectors: 2x NL4 (Neutrik SpeakOn)
  • security: short circuit, open circuit, thermal, RF protection
  • DSP functions: hi-pass filter, lo-pass filter, 4-band EQ, limiter, delay
  • dimensions: 89 x 483 x 259 mm
  • weight: 6.0 kg
QSC AD-S112SW subwoofer passivo
1x QSC AD-S112SW subwoofer passivo
The QSC AD-S112Sw passive installation subwoofer is suitable for restaurants, shops, and a variety of audio-visual applications. It's perfect in combination with the QSC AcousticDesign range.

Caratteristiche

Ingresso jack 6,35 mm TRS
No
Diametro del woofer
12'' (305 mm)
Uscite con morsetti per cavi
Sì
Sensibilità
90 dB
Peso per cassa
13 kg
SPL massimo
110 - 119 dB
Frequenza massima del subwoofer
140 Hz
Frequenza minima
35 - 39 Hz
Impedenza nominale
8 ohm
Potenza di picco in watt
200 - 349 watt
Potenza RMS
350 - 499 watt
Ingresso speaker con blocco
Sì

Peso e dimensioni imballaggio incluso

Peso
15,0 kg

Specifiche

  • passive installation subwoofer
  • perfect with AD series speakers
  • rugged, lightweight ABS housing
  • aluminium powder-coated grille
  • turbulent flow reduction port
  • mounting bracket and M10 rigging points
  • IEC60529 IP-54 rating: splash and dust resistant
  • frequency range: 30 – 135 Hz
  • capacity: 300W, 50V (RMS)
  • sensitivity: 90 dB SPL
  • dispersion angle: 75°
  • max. continuous SPL: 115 dB
  • max. peak SPL: 121 dB
  • impedance: 8 ohms
  • tweeter: 1.4 voice coil compression driver
  • woofer: 12-inch cone
  • input connector: Euroblock with parallel output
  • housing material: ABS polymer
  • grille material: aluminium, powder coated
  • colour: black
  • suitable for indoor and outdoor use
  • weight: 13.2 kg
  • dimensions: 594 x 354 x 323 mm
  • includes:
    • suspension bracket
    • Euroblock connector
    • panel cover
bax-shop.uk | B-stock

Informazioni sul prodotto

Cod. prodotto: 9000-0017-3810

Descrizione

The AD-S8T set by QSC was specifically designed for professional use and is suitable for use as a live PA or for background music in an establishment. The set consists of four AD-S8T speakers, two GXD8 amplifiers and one AD-S112SW subwoofer. The AD-S8T is a first-rate speaker with a maximum SPL of 119 dB. It's equipped with an 8-inch woofer and a 1-inch compression driver. In terms of looks, the classy black speaker has a sleek appearance with a minimalistic design.

GXD8 amplifiers

The reliable QSC GXD8 power amplifier is capable of an impressive 4500-watt Class-D output capacity. This, in combination with an ultra-flexible DTP, makes the GXD8 an essential part of your setup. You don't need to invest in an extra laptop or rack modules to adjust the settings; the system can be configured directly on the GDX8 itself!

AD-S112SW sub

Finally, we come to the AD-S112SW subwoofer, which is also part of QSC's AcousticDesign range. This 12-inch subwoofer is the perfect companion to the AcousticDesign full-range speakers, and this complete set will provide you and your audience with excellent, reliable audio for years to come!

QSC AD-S8T diffusore da installazione Su questo prodotto avrete una garanzia di 2 anni.

QSC GXD 8 amplificatore con processore integrato 4500 W Registrando questo prodotto sul sito web di QSC entro 30 giorni dalla data di acquisto potrete usufruire di una garanzia di 6 anni. Senza la registrazione la garanzia sarà di 2 anni.

QSC AD-S112SW subwoofer passivo Su questo prodotto avrete una garanzia di 2 anni.

Recensioni (4)

5,0
4 Valutazioni

Valutazione

5 stelle 4 4 stelle 0 3 stelle 0 2 stelle 0 1 stella 0
Non è più possibile scrivere una recensione su questo articolo.

Recensioni da altri paesi

5 / 5

QSC GXD 8 amplificatore con processore integrato 4500 W

Wat een degelijke versterker!
Zeer licht in gewicht en dan toch zat vermogen, heel blij mee en de DSP werkt ook zeer fijn en duidelijk.
Scheelt enorm veel sjouw werk.
Dankzij de goede limiters ook heerlijk te gebruiken als floor monitorversterker.
 | 
Questa recensione é stata tradotta automaticamente dall'olandese.
5 / 5

QSC GXD 8 amplificatore con processore integrato 4500 W

Super produit, reçu très rapidement, site très sérieux le top je vous le conseille !
 | 
Questa recensione é stata tradotta automaticamente dal francese.
5 / 5

QSC GXD 8 amplificatore con processore integrato 4500 W

for the price, usually around £650, you get 1200 watts per channel into 4 ohms. The build quality seems very good, the performance is excellent, and they'll happily drive a single E18SW (800W rms) per channel to high output levels. I have now used these for a number of events in the last couple of years and they have performed flawlessly. The built in DSP is very capable, and useful if you have more than one type of speaker in use. Being switch-mode, they're light, which is nice when you have seven of them in a flightcase. They seem to be built to a slightly better standard than the GXD4 - one of which I've had fail.



The only negative thing I can think of is that they lack air filters behind the grilles so after a summer of events they become quite dusty inside. Routine maintenance should include taking the lids off and cleaning them every so often.
 | 
Questa recensione é stata tradotta automaticamente dall'inglese.
5 / 5

QSC GXD 8 amplificatore con processore integrato 4500 W

Is dit product te gebruiken voor de Hk audio linear 5 f115 passieve top ?
en is er software voor apple om deze versterker te gebruiken, zo ja waar kan ik deze vinden ?

Bedankt.
 | 
Questa recensione é stata tradotta automaticamente dall'olandese.

Download

Confrontate le vostre attrezzature (1/10)
Cancella tutti i prodotti Confronta