(B-Stock) Vintage Series FFV618 Black chitarra elettrica

Guitar is phenomenal. Didn’t want to pay epiphone or Gibson prices! Needed a small setup when it arrived. Feels really good, nice weight to it, doesn’t feel cheap at all and the build quality is great. Pickups sound ok. Maybe worth upgrading later down the line. Tuners feel smooth, smooth fret ends and not sharp. Highly recommend!

J'ai acheté cette guitare pour un upgrade , l'équilibre est très bien , la qualité de la lutherie également...J'ai customisé la peinture , changé les mécaniques , l'électronique , les micros et fait un sillet en os. J'ai retouché les frettes et refait un polissage....
Et maintenant Dr. Jekyll s'est transformé en Mr. Hyde...
Ceci dit j'étais très surpris du son d'origine qui pour le prix de cette guitare est surprenant. Je recommande...

Fazley flying V
For the price this is a great guitar.
Looks good, fit and finnish better than I expected.
After a little set up,tighten truss rod,raise bridge,tune,stretch strings and tune again, which is all very normal for a new guitar,took me 45 mins to get the V sounding really good. Its now my favourite guitar.
For the price I am very happy with this purchase and will consider getting other guitars to add to my collection.
First time having a new guitar through Internet purchase, arrived on time, packaging very good double boxed no damage. Bax music very good keeping me informed via email and delivery spot on DHL.

Warning: This tale grew in the telling => a very long and over detailed review.

I have a child who wants a Flying V and only a Flying V. I cannot run to Epiphone, let alone Gibson prices. At the moment this is the only budget Flying V on the market that I can find that looks reasonable close to a Gibson, in this case the pick guard less rear routed 1980s version of the V.

The guitar arrived 3 days ago and while I did initially consider returning it for a direct replacement, I was not sure that I would get another that is significantly better and I could even end up with an example with more serious problems, and so I have decided to keep it.

The pros:
It is playable with one exception, some of the the fret ends - see cons. The truss rod does appear to work, but I have not had to make any major adjustments, only to slacken off for a little more relief. The action can be taken down the high end of low (high E = 1.25mm and bottom E = 1.75mm at the 12th fret), without too much choking or buzz. There are only 4 rocking frets, none of which are bad enough to require an immediate fret levelling. The (plastic) nut is cut well enough. The guitar can be intonated, even with the cheap supplied strings. The pickups can be taken up to my preferred height without getting unduly tilted or floppy.

The hardware ls largely what you might expect at this price point and it all works to a greater or lesser degree:
(1) Tuners: These are no brand generic tuners which have an acceptable finish, are somewhat imprecise in tuning, but do not appear to slip. The guitar has not held tune all that well, but I can pretty put much of that down to the low quality strings, which will of course be replaced now that I have decided not to return the guitar. BTW… These tuners are not as good in feel as the ones I have had on some other budget brands, notably Harley Benton and Antiquity (PMT house brand - now deceased), but are still way ahead of these found on old cheaper Epiphones like the Les Paul Special II.
(2) Small cheap looking potentiometers, a 'proper' mechanical 3 way toggle switch, i.e. not a PCB switch, which feels OK, but it is visually not of any great quality, and pickups that while not exactly the 1980s Gibson ‘Dirty Fingers’ should be reasonable output humbuckers (measured resistance of 7.9 KOhms at the neck and 11.4 KOhms for the bridge).
(3) Bridge, stop bar tailpiece, strap buttons, which have OK cosmetic appearance and function well enough.

The cons:
The paint finish: These are a few small cracks in and one 6 mm wide 2mm deep semi-oval chip out of the varnish on the neck binding. The front of the guitar has a very shallow rather strange looking three legged ‘spider’ indent about 5cm across located south and inboard of the control knobs. Otherwise pretty reasonable, but I did reminded myself that with black underlying defects are always more visible than with other colours and therefore did make some allowances.

The input socket: This is located on the inside of the V on a flat surface. It loos as if the plate which holds the socket was designed to screw to a curved surface and is consequently slightly buckled in the centre on both the top and bottom. The jack socket is of poor quality and whilst it grips the plug all too well at the moment (try getting the jack plug out without using what seems like an unreasonable amount of force), I do not hold out much hope of it having a very long life.

Construction: The frets are dull and scratchy, as is to be expected at this price point, and the fret ends are not that well finished, but 4 fret end on the Low E side are potentially hazardous. These are somewhat deformed, cut with a very shallow angle, lifting at the end and are razor sharp. As I am now keeping the guitar, these will have to be dealt with immediately. The holes for the switch and pots have not been drilled in a straight line, the middle pot being 3mm closer to the outside edge of the guitar, and the spacing of the pots is not equidistant with the middle pot being 3mm closer to the first than to the last pot, giving a somewhat ‘higgly-piggly’ unprofessional appearance. There are some brown glue marks on and around the fretboard inlays, but I did expect that.

Overall:
Would I buy another (if it were stolen/lost/destroyed)? Yes, as I would as I would not really have a choice unless something else cheap and Gibson like had appeared on the market. If it were just for my own use I may be tempted to try the Harley Benton, but the recipient of this guitar wants a Gibson look alike and would not be happy with the truncated headstock shape or the peculiar looking cut outs from inside of the V wings that the Harley Benton currently exhibits.

Ik had deze flying v gekocht om als mod project te gebruiken leuke gitaar maar jammergenoeg niet speelbaar voor een beginner. De ground is slecht gemonteerd de pick ups zijn van slechte kwaliteit en het hout van de body zet bij het kleinste beetje temperatuur verschil uit waardoor de brug loskomt zeer teleurgesteld dat dit aan beginners verkocht word .

Deze gitaar gekocht voor mijn zoon die toch al een 4 tal jaar gitaar speelt.
Hij is er heel tevreden mee, ziet er heel mooi uit . Na minimaal bij stemmen was hij
er hem ermee aan het uitleven.
Levering ook dik in orde, vrijdag avond besteld en dinsdag voormiddag stevig verpakt geleverd.
Van ons 5 sterren en een nieuwe klant erbij.

Niet slecht,al hield ik mn hart vast toen de bezorger van dhl voor de deur stond met een door de regen uit elkaar valende buiten doos met inhoud

So the guitar is the most similar equivalent of the Flying V from Epiphone/Gibson company. Well packed, beatiful. Also the frets dont cut the fingers, could have been polished better but thats not a big problem. The pickups are ok, no microphoning, on a good patch on Helix they sound decent. So now the "not so good" part: The finition.
The QC is not so impresive, there is a lot of tiny glue stains and the binding was not so well done. Also i got the copy with ONE SCRATCH! Im joking, it was still better than the Jackson and LTD i got.

Overall you want a playing base for modification and you dont want to spend 700 euro to test Flying V - it's no brainer. Take it.

Prima gitaar, helaas zitten er wel wat nadelen aan maar zeker een goed ding

waar voor je geld!
snelle levering!