SPL Phonitor e Silver amplificatore per cuffie

Specifiche

• SPL high-end studio headphone amplifier
• colour: silver
• speaker simulation via headphones
• monitoring alternative for studios and mobile units
• adjustment of centre point and stereo image
• large volume knob
• adjustable volume via IR (infrared) remote control
• compensation for difference in panning levels
• line inputs: Neutrix XLR, unbalanced RCA
• monitor/line output: stereo XLR output
• front-mounted headphone output
• voltage: 230V, 50 Hz / 115V, 60 Hz
• power consumption: max. 30 VA
• fuses (230V): T 500 mA
• fuses (115V): T 1 A
• dimensions: 278 x 335 x 57 mm
• weight: 3.3 kg

inputs:

• stereo 1: Neutrix XLR, balanced
• Impedance: +/- 20 kOhms
• maximum input level: 32.5 dBu
• stereo 2: RCA, unbalanced
• Impedance: +/- 10 kOhms
• maximum input level: 32.5 dBu
• stereo 3 (optional):
• coax SPDIF (RCA)
• optic TOSLINK (F06)
• USB (B)
• sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

monitor/line outputs:

• connector: Neutrik XLR, balanced
• frequency range (-3 dB): 10 Hz to 300 kHz
• crosstalk @ 1 kHz: -90 dB
• THD @ 1 kHz: < 0.00091 %
• dynamic range: 130.5 dB

headphone output:

• connector: stereo jack (TRS)
• configuration: tip = left, ring = right, sleeve = GND
• impedance: 0.18 ohms
• frequency range (-3 dB): 10 Hz - 300 kHz
• crosstalk @ 1 kHz: -90 dB
• THD @ 1 kHz: < 0.00091 %
• dynamic range: 135.5 dB

maximum output power (@ 30 dBu, 1 kHz):

• 2 x 1W at 600-ohm impedance
• 2 x 2W at 300-ohm impedance
• 2 x 3.7W at 120-ohm impedance
• 2 x 2.9W at 47-ohm impedance
• 2 x 2.7W at 32-ohm impedance