basato su 3477 recensioni

JB systems Vibe 10-15S set di casse, combinazione promozionale

Questo prodotto è fuori assortimento e non può essere ordinato.

Nessuna alternativa trovata
JB systems Vibe 10-15S set di casse, combinazione promozionale
Cod. prodotto: W-70154 Garanzia Bax Music: JB systems C3 1800 amplificatore Su questo prodotto avrete una garanzia di 2 anni. Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m Su questo prodotto avrete esclusivamente una garanzia che copre i difetti di fabbricazione. JB systems Vibe 10 MKII cabinet 200 W Su questo prodotto avrete una garanzia di 2 anni. JB systems Vibe 15SUB MKII subwoofer 400 W Su questo prodotto avrete una garanzia di 2 anni. Innox IVA07 asta di raccordo 35 mm Su questo prodotto avrete una garanzia di 2 anni.

Descrizione

This is the ideal speaker set for more serious applications. You will often find this system in the inventory of artists and entertainers. The Vibe 10 satellite speaker allows for sparkling highs and clear middle tones thanks to the combination of a sturdy tweeter and a 10-inch woofer, the lows are taken care of by the 15-inch subwoofers from the Vibe series - the Vibe 15S.

This is quite a complete set in itself, but JB Systems add some more by including the amps, cabling and distance rods for satellite speakers.

The C3-1800 amp amplifies the entire set and has a power of 2x 450 watts RMS for the satellite speakers and 1x 900 watts for the subwoofers. This way, the set is driven in a balanced way by a sizeable amp and you can create a full and warm sound that fills the whole venue with the right sounds.

The robust exterior of the renewed Vibe family looks great and is functional too! Foam behind the grille keeps certain components safe from transport damage and keeps the grille in place and the cabinets feature neat splash lacquer, which prevents scratches! Even during intensive use, your set will look great!

Specifiche

JB systems C3 1800 amplificatore 1x JB systems C3 1800 amplificatore

Durable 3-channel amplifier (2x 450 W @ 4 ohms for satellite speakers, 1x 900 W @ 4 ohms mono for subwoofers) with built-in crossover. Finally we can enjoy an amp series whereby you can use one single amp to power a complete sound set!

Caratteristiche

Formato rack 19'' sì, 2 U
Compatibile con 2 ohm no
Number of amplifier channels other
Uscita per deviazione audio no
Modalità bridge no
Connettore in ingresso jack (6,35 mm), XLR
Filtro integrato HPF
Protezioni integrate indicatore di clip
Processore DSP integrato no
Raffreddamento a ventola
RMS power (4 ohms) per channel not applicable
RMS power (at 8 Ohms) per channel not applicable
Classe dell'amplificatore AB
Uscita amplificatore connettore speaker con blocco
Dotato di crossover sì, variabile

Peso e dimensioni imballaggio incluso

Peso (imballaggio incluso) 25,0 kg
Dimensioni (imballaggio incluso) 52,0 x 52,0 x 16,0 cm

Specifiche

  • can also be used as an ordinary 2-channel amplifier
  • 1,800W total RMS power:
  • satellite outputs (stereo): 2x 450 Wrms @ 4 Ω
  • subwoofer output (mono): 900 Wrms @ 4 Ω
  • very compact housing, only 2 U (88 mm) high
  • internal 24 dB/octave active crossover
  • 90 - 250 Hz setting of the crossover point
  • filter of the satellite outputs can be switched off
  • the internal subwoofer processor allows for powerful bass reproductions
  • limiters can be switched on/off
  • phase inversion switch for subwoofer
  • active crossover: 90 -250 Hz (24 dB/octave Linkwitz Riley)
  • input sensitivity: 770 mV
  • input impedance: 20 kΩ (bal) / 10kΩ (unbal)
  • S/R ratio >90dB
  • damping factor >500
  • cooling with fans
  • inputs: combined XLR/jack chassis, balanced/unbalanced
  • outputs: lockable speaker connectors
  • AC power: AC230 V / 50 Hz
  • dimensions (mm): 483 x 473 x 88 (19 inches/2 U)
  • weight: 24 kg
Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m 4x Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m
Con il cavo Devine SPE15/5 sarete certi che il vostro segnale rimarrà sempre intatto. Il cavo è composto da due anime (1,5 mm2) con alle estremità connettori speaker con blocco. Altissima qualità ad un prezzo irrisorio.

Caratteristiche

Sustainable product not specified
Lunghezza 5,00 m
Maschio / femmina femmina - femmina
Tipo di connettore audio connettore speaker con blocco 4p
Number of cores 2
Sezione del cavo 2 x 1,5 mm2

Peso e dimensioni imballaggio incluso

Peso (imballaggio incluso) 500 gr
Dimensioni (imballaggio incluso) 24,0 x 20,0 x 4,5 cm

Specifiche

  • cavo speaker
  • connettore 1: speaker con blocco (4SPP)
  • connettore 2: speaker con blocco (4SPP)
  • buona qualità del segnale
  • tipo di cavo: 2x 1,5 mm2
  • adatto a potenze fino a 500 W (PA)
  • lunghezza: 5 m
  • colore: nero
JB systems Vibe 10 MKII cabinet 200 W 2x JB systems Vibe 10 MKII cabinet 200 W

The new Vibe series has been released! Improvements as well as new additions can be found in this series! Among the latter is this 10-inch satellite, which can be combined with the 15-inch sub!

Caratteristiche

Diametro del woofer 10'' (254 mm)
Diametro tweeter 1,5" (38 mm)
Sustainable product not specified
Sensibilità 95 dB
Peso per cassa 15 kg
Diffusore da installazione / 100 volt no
Speaker cabinet material wood
SPL massimo 120 - 129 dB
Frequenza massima 20 - 20,9 kHz
Frequenza minima 60 - 79 Hz
Impedenza nominale 8 ohm
Potenza di picco in watt 350 - 499 watt
Potenza RMS 200 - 349 watt
Set no
Speaker connection locking speaker

Peso e dimensioni imballaggio incluso

Peso (imballaggio incluso) 15,6 kg
Dimensioni (imballaggio incluso) 57,0 x 39,0 x 36,0 cm

Specifiche

  • robust speaker cabinet
  • can be used as a monitor, satellite speaker or speech installation
  • fit for fixed and mobile applications
  • relatively compact and light construction
  • fitted with 1.5-inch tweeter and 10-inch woofer
  • solid MDG housing
  • scratchproof polyurethane paint layer
  • durable metal grille with acoustic foam, ensures a better look and additional protection
  • fitted with M10 rigging points
  • built-in 35mm stand adapter
  • specially designed fibreglass horn
  • features 2 Neutrik SpeakOn connectors
  • built-in flushed handles
  • with rubber feet
  • RMS capacity: 200 watts
  • maximum capacity: 400 watts
  • impedance: 8 ohms
  • frequency range: 65 to 20,000 Hz
  • dispersion angle: 100 x 70 degrees
  • sensitivity: 95 dB/w/m
  • maximum SPL: 120 dB
  • dimensions: 330 x 510 x 302 mm
  • weight: 15 kg
JB systems Vibe 15SUB MKII subwoofer 400 W 2x JB systems Vibe 15SUB MKII subwoofer 400 W

A 15-inch subwoofer was missing from the Vibe series. But, luckily, this is the case no longer! Ideally, you can make it active with the AVM-2 module.

Caratteristiche

Ingresso jack 6,35 mm TRS no
Diametro del woofer 15'' (380 mm)
Uscite con morsetti per cavi no
Sustainable product not specified
Sensibilità 96 dB
Peso per cassa 35 kg
Speaker cabinet material wood
SPL massimo 120 - 129 dB
Frequenza massima del subwoofer 300 Hz
Frequenza minima 40 - 49 Hz
Impedenza nominale 8 ohm
Potenza di picco in watt 750 - 999 watt
Potenza RMS 350 - 499 watt
Speaker connection wire terminal
Ingresso speaker con blocco

Peso e dimensioni imballaggio incluso

Peso (imballaggio incluso) 42,0 kg
Dimensioni (imballaggio incluso) 66,0 x 65,0 x 47,0 cm

Specifiche

  • rugged subwoofer cabinet
  • made of MDF
  • features scratchproof paint layer
  • built-in M20 distance rod flange
  • high capacity 15-inch woofer with aluminium basket
  • built-in flushed handles
  • mounting points at the rear for wheels
  • with rubber feet
  • capacity: 400 W RMS, 800 W peak
  • input impedance: 8 ohms
  • sensitivity: 96 dB, 1 W/1 m
  • maximum SPL: 124 dB
  • frequency range: 40 - 300 Hz
  • dimensions: 440 x 595 x 605 mm
  • weight: 35 kg
Innox IVA07 asta di raccordo 35 mm 2x Innox IVA07 asta di raccordo 35 mm
L'IVA07 è una robusta asta di raccordo che permette di distanziare un satellite da un subwoofer. Regolabile in altezza per una libertà maggiore e dotata di attacco da 35 mm a entrambe le estremità.

Caratteristiche

Speaker pole mount 35 mm
Distance rod weight capacity 20 -29 kg
Sustainable product not specified
Altezza regolabile
Maximum height of stand 140 to 150 cm
Set no

Peso e dimensioni imballaggio incluso

Peso (imballaggio incluso) 1,5 kg
Dimensioni (imballaggio incluso) 84,0 x 9,5 x 9,0 cm

Specifiche

  • asta di raccordo Innox
  • adatta per il montaggio tra un subwoofer e un satellite
  • attacco da 35 mm ad entrambe le estremità
  • robusta manopola
  • pin di sicurezza, inseribile in diversi punti
  • regolabile in altezza tra 940 e 1470 mm
  • peso: 1,5 kg
  • portata massima: 25 kg
  • colore: nero
  • struttura: acciaio
Non è più possibile scrivere una recensione su questo articolo.

Recensioni da altri paesi

Tradurre tutte le recensioni in Italiano

Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
superhandige tussenpaal met schroefdraad. Het vertrouwen is er, kwalitatief materiaal en doet wat ie moet doen
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Deze inox tussenpalen gebruik ik bij mijn Electrovoice toppen. passen perfect zijn stabiel en zijn makkelijk op hoogte in te stellen. kortom een prima keus!
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Kijk, dit is een prima tussenpaal van 35mm voor te gebruiken bij niet te grote/zware speakers, dus meestal op hobby niveau. Voor deze prijs kan je geen professioneel materiaal verwachten. Is dit dan een slecht product? Helemaal niet! Dit is een zeer goed product, maar kijk waar je het voor gebruikt. Ik speel sporadisch nog eens op feestjes en voor mij is dit meer dan voldoende. Gemakkelijk om de hoogte in te stellen, beveiligd door een pin tegen het naar beneden zakken.
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Bonne bar de couplage prix très correct fait le travail je recommande je suis très satisfaits
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Super rapport qualité/prix. A voir dans le temps...
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Gewoon goed voor niet al te zwaar werk. Ik zou er zelf geen toppen op zetten die zwaarder zijn dan 22 kg.
Kunststof blokje op de schroefwartel zit idd niet vast zoals in eerdere review geschreven is. Maar als je hem niet uit mekaar haalt kan het lang aan. Prijs kwaliteit. Dat ze het kunnen maken voor dat geld.
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Aangekocht om Innox IVA SB 04 35mm adapter voor 2 speakers op te plaatsen. Stevig en sterk genoeg om deze 2 speakers te plaatsen en te dragen. Klein minpunt, bij plaatsing in de daar voorziene adapter op de subbass zat redelijk wat speling. Een beetje ducktape er omheen gedaan en hij zit nu stevig en vast. Aanrader voor deze prijs, moet niet onder doen voor de duurdere type's.
Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m

Ha scritto quanto segue su Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m
Ik vind het belangrijk dat een speakerkabel stevig is en soepel en dat de connectoren betrouwbaar zijn. Ik was verrast dat het OFC kabel is voor dit bedrag. De Bax tabel op de site geeft aan dat er over een lengte van 10m 1,5 mm 500 Watt vermogen kan. En dit zijn 5m lengtes. Dus lijkt mij het verlies echt te verwaarlozen en kun je er veel vermogen doorheen sturen (zat voor de meeste toepassingen lijkt mij).
Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m

Ha scritto quanto segue su Devine SPE15/5 cavo speaker 2x 1,5 mm, 5 m
Kwalitatief goed snoer voor een klein prijsje.
Snoer is lekker soepel en stevige aansluitingen.
Weer super snel geleverd door Bax.
Innox IVA07 asta di raccordo 35 mm

Ha scritto quanto segue su Innox IVA07 asta di raccordo 35 mm
Barre super et pas cher, Commande rapide, Bravo
Descrizione Tipo Lingua Estensione
Devine SPE15/5 Declaration of Conformity Manual Sconosciuto
Confrontate le vostre attrezzature (1/10)