basato su 3477 recensioni

HK Audio Elements E435I set da installazione passivo

ancora nessuna recensione
HK Audio Elements E435I set da installazione passivo

Fuori assortimento

Questo prodotto non può essere ordinato

Specifiche

Caratteristiche

Diametro del woofer
3,5'' (88,9 mm)
Diametro tweeter
1.2 inches
Sensibilità
90 dB
Peso per cassa
2 kg
Diffusore da installazione / 100 volt
No
SPL massimo
110 - 119 dB
Frequenza massima
14 - 14,9 kHz
Frequenza minima
15 - 17 Hz
Impedenza nominale
4 ohm
Potenza di picco in watt
1250 - 1499 watt
Potenza RMS
1000 - 1249 watt
Set
No

Peso e dimensioni imballaggio incluso

Peso
5,5 kg
Dimensioni
95,0 x 12,0 x 11,0 cm

Specifiche

  • 2x HK Audio Elements E435 mid/treble passive speaker module
  • With wall bracket set
  • 2x 4x 3.5-inch full-range driver
  • Projection: 70 degrees horizontally
  • Nominal impedance: 16 ohms
  • Continuous: 150 watts
  • Frequency range: 140 - 20,000 Hz (-10 dB) via built-in system filter
  • Sensitivity: 97 dB / 1 W
  • Crossover frequency: 140 Hz, 12 dB filtering
  • Connectors: 2x E-Connect in and 1x E-Connect out
  • Colour: black
  • Dimensions: 110 x 950 x 120 mm (W x H x D)
  • Weight: 5.5 kg

Nessuna alternativa trovata

Specifiche

Caratteristiche

Diametro del woofer
3,5'' (88,9 mm)
Diametro tweeter
1.2 inches
Sensibilità
90 dB
Peso per cassa
2 kg
Diffusore da installazione / 100 volt
No
SPL massimo
110 - 119 dB
Frequenza massima
14 - 14,9 kHz
Frequenza minima
15 - 17 Hz
Impedenza nominale
4 ohm
Potenza di picco in watt
1250 - 1499 watt
Potenza RMS
1000 - 1249 watt
Set
No

Peso e dimensioni imballaggio incluso

Peso
5,5 kg
Dimensioni
95,0 x 12,0 x 11,0 cm

Specifiche

  • 2x HK Audio Elements E435 mid/treble passive speaker module
  • With wall bracket set
  • 2x 4x 3.5-inch full-range driver
  • Projection: 70 degrees horizontally
  • Nominal impedance: 16 ohms
  • Continuous: 150 watts
  • Frequency range: 140 - 20,000 Hz (-10 dB) via built-in system filter
  • Sensitivity: 97 dB / 1 W
  • Crossover frequency: 140 Hz, 12 dB filtering
  • Connectors: 2x E-Connect in and 1x E-Connect out
  • Colour: black
  • Dimensions: 110 x 950 x 120 mm (W x H x D)
  • Weight: 5.5 kg

Informazioni sul prodotto

Cod. prodotto: 9000-0005-2465

Descrizione

HK Audio's Elements E435I is an installation set that includes a pair of E435 passive speakers and a wall bracket set. The E435 speakers are mid/treble speakers that feature E-Connect and weigh only 4.7 kilos. This set accommodates fixed installation in halls, pubs, clubs and the like. In fact, you can use them for virtually anything: (background) music but also speech.

Features of the speakers

Both E435 mid/treble modules have four 3.5-inch full-range drivers with a power capacity of 150 Watts RMS at a nominal impedance of 16 Ohms. The frequency range of the E435s is 140 -20,000 kHz (-10 dB) and runs through an integrated system filter, which means that they can handle trebles, mids as well as bass-like tones. Additionally, the speaker has a crossover frequency of 140 Hz with a 12 dB filtering. Thanks to a 70-degree projection, the sound is spread over your audience beautifully.

Mounting and E-Connect

The wall brackets make these speakers easy to mount and you can open up the bottom and top bracket so that they'll fit the combined speakers. Thanks to E-Connect, you'll only need one audio cable as the signal enters via the bottom speaker and is then sent to the top via the stand adapter - allowing for a neat-looking speaker stack.

Garanzia Bax Music Registrando questo prodotto sul sito web di hkaudio.com entro 30 giorni dalla data di acquisto potrete usufruire di una garanzia di 5 anni. Senza la registrazione la garanzia sarà di 2 anni.

Recensioni

Non è più possibile scrivere una recensione su questo articolo.
Non ci sono ancora recensioni per questo prodotto.

Altri prodotti di HK Audio

Trova tutti i prodotti del marchio HK Audio

Prodotti alternativi di altre marche

Cerca tutti i prodotti nella categoria Full range passivi
Confrontate le vostre attrezzature (1/10)