Klark Teknik DF1000 Automatic Feedback Suppressor
Cod. prodotto: 9000-0050-6889
Informazioni sul prodotto
Descrizione
With the aid of the Klark Teknik DF1000 automatic feedback suppressor, reduce or completely remove any chance of feedback that might interrupt your signal and raise the total output of your system by an impressive 10dBs without fear. All of this happens courtesy of an incredibly narrow notch-filter that can be applied to 32 frequencies, so that they remain untouched by the irritation of feedback. The Klark Teknik DF1000 can be used in stereo for a single system, or via two mono channels for two systems. However you set it up, it's guaranteed to provide reliable signal stabilising support.
Impegno di servizio
Garanzia Bax Music
Su questo prodotto avrete una garanzia di 10 anni.
Su questo prodotto avrete una garanzia di 10 anni.
Specifiche
Caratteristiche
Sustainable product
Not specified
Peso e dimensioni imballaggio incluso
Peso
3,7 kg
Dimensioni
57,5 x 36,0 x 11,5 cm
Specifiche
Klark Teknik DF1000
automatic feedback suppressor
input:
2x XLR/TRS combo
2x 3-pin Euroblock
input impedance : approx. 20 kOhm
normal input level: + 4dBu
maximum input level: + 21dBu
outputs:
2x XLR
2x 3-pin Euroblock
output impedance: approx. 50 Ohms
normal output level: + 4dBu
maximum output level: +21 dBu
controls:
power on/off
supression
filter reset
indicators:
power
active
reset
frequency range: 20Hz - 20kHz +0/-0.5dB
dynamic range: 104dB
THD + N: < 0,01% at 20Hz to 20kHz, + 4dBu IN
crosstalk: >81dB
S/N Ratio: > 88dB at + 4dBu IN
CMRR: >45dB
processor system gain: 0dB
extra acoustic gain: 10dB
DSP converters: 24-part
DSP frequency: 48kHz
feedback reduction method: automatic detection and notch filter adjustment
filters: x32 independent digital notch filters per channel
filter width:
minimum: 1/126th octave
maximum: 1/38th octave
resolution: 0.2Hz
feedback search mode time: 100ms-400ms
multiple feedback search mode time: 2 sec - 4 sec
power supply: auto-switching power supply
voltage: 100-240V AC, 50 / 60Hz
fuse: T 1.25A 250V MET H
power consumption: 10 W
power port: standard IEC
operating temperature: + 0°C to + 45°C
storage temperature: -20°C to + 60°C
dimensions: 50 x 483 x 296mm
weight: 2.9kg
Non è più possibile scrivere una recensione su questo articolo.
Non ci sono ancora recensioni per questo prodotto.
