Il mio account

JB systems AVM-2 modulo di amplificazione digitale, 500 W RMS

2 / 5

JB systems AVM-2 modulo di amplificazione digitale, 500 W RMS

Fuori assortimento

Questo prodotto non può essere ordinato

Specifiche

Peso e dimensioni imballaggio incluso

Peso: 3,0 kg
Dimensioni: 40,0 x 23,0 x 13,0 cm

Specifiche

powerful amp module
easy mounting in a few minutes
fit for the Vibe 15 and 30 (MKII)
class D digital circuitry
power: 8 ohms 500 W RMS
power: 4 ohms 850 W RMS
balanced/unbalanced XLR in and output
variable crossover: 90 - 250 Hz
lockable output for an extra passive speaker (8 ohms, only with the Vibe 15)
IEC power connector
on/off switch
frequency range (+/-2dB): 20 to 20,000 Hz
signal/noise ratio (A-weighted) > 88 dB
damping factor > 350
cooling: cooling fins and fan with magnetic field
signal connectors: 3-pole XLR
amplifier output: locking connector +1/-1
protections: thermic, limiter, short-circuiting, DC voltage
fuse: 5x 20 mm T8AL, 250 V
mains voltage: 230V AC, 50 Hz
maximum power consumption: 1000 W @ 4 ohms
dimensions: 320 x 160 x 78 mm
mounting hole: 298 x 138 mm
weight: 3 kg

Nessuna alternativa trovata

Specifiche

Peso e dimensioni imballaggio incluso

Peso: 3,0 kg
Dimensioni: 40,0 x 23,0 x 13,0 cm

Specifiche

powerful amp module
easy mounting in a few minutes
fit for the Vibe 15 and 30 (MKII)
class D digital circuitry
power: 8 ohms 500 W RMS
power: 4 ohms 850 W RMS
balanced/unbalanced XLR in and output
variable crossover: 90 - 250 Hz
lockable output for an extra passive speaker (8 ohms, only with the Vibe 15)
IEC power connector
on/off switch
frequency range (+/-2dB): 20 to 20,000 Hz
signal/noise ratio (A-weighted) > 88 dB
damping factor > 350
cooling: cooling fins and fan with magnetic field
signal connectors: 3-pole XLR
amplifier output: locking connector +1/-1
protections: thermic, limiter, short-circuiting, DC voltage
fuse: 5x 20 mm T8AL, 250 V
mains voltage: 230V AC, 50 Hz
maximum power consumption: 1000 W @ 4 ohms
dimensions: 320 x 160 x 78 mm
mounting hole: 298 x 138 mm
weight: 3 kg

Informazioni sul prodotto

Cod. prodotto: W-01713

Descrizione

If you like to work with JB Systems' Vibe series, you will benefit from getting your hands on the AVM-2! This amplifier module can easily be screwed into the Vibe 15 or 30 MKII. This way, you can turn your passive speakers into an active one. Thanks to its low weight, you will hardly notice it being there! In other words: leave your amp rack at home!

AVM-2 and its applications

The AVM-2 is compatible with the Vibe 15 and Vibe 30. When it's mounted into the Vibe 15, it produces no less than 500 watts RMS! A great advantage of this unit is that you can connect another passive speaker via the lockable connector. In that case, the AVM-2 module provides 850 watts RMS, distributed over the two speakers.
When it's mounted into the Vibe 30, the internal construction lets the module work at 4 ohms, providing a single Vibe 30 MKII cabinet with 850 watts RMS!

Furthermore, the module features settings for the crossover point, which starts coming in handy if you add Vibe 18S subwoofers to the mix! The low frequencies will then provided by the subs, while the middle and highs are taken care of by the Vibe 15 or 30 cabinets. An optimal frequency distribution so!

Consigli e osservazioni

Attenzione: la potenza indicata di 4 ohm è applicabile solo con due altoparlanti Vibe 15 (potenza condivisa) o con un singolo altoparlante Vibe 30.
Attenzione: montando l'AVM-2 nel Vibe 30 MKII, non è possibile collegare un altoparlante aggiuntivo.

Impegno di servizio

Garanzia Bax Music Su questo prodotto avrete una garanzia di 2 anni.

Su questo prodotto avrete una garanzia di 2 anni.

Recensioni (1)

2,0

1 Valutazione

Valutazione

5 stelle 0 4 stelle 0 3 stelle 0 2 stelle 1 1 stella 0

Non è più possibile scrivere una recensione su questo articolo.

Recensioni da altri paesi

2 / 5

JB systems AVM-2 modulo di amplificazione digitale, 500 W RMS

ampli acheté debut 2018 , il a fait 3 soirées et à rendu l'âme.

la cause est le ventilateur qui a claqué et de ce fait l'ampli a surchauffé

sav pas pris en compte car connectique coupée.

donc j'ai racheté un ampli actif mais cette fois ci avec un gros radiateur alu et non pas un ventilateur .je ne le recommande pas dutout

3 dicembre 2018 | daniel E.

Questa recensione é stata tradotta automaticamente dal francese.